This tender has expired.

Tender description

An automated assembly system on large area (610 x 610 mm2) is needed. System focus is the assembly of a wide variety of components (SMD, bare dies, ...) in high precision as one key process step of the Fan out panel level packaging process chain. The system should have high productivity, an assembly precision of < ± 4 μm (3 Sigma) at > 5000 u.p.h. is targeted. Components will be available on dicing frame, tape and reel, waffle or gel pack or JEDEC-tray – all of these must be handled for automated assembly.

Legal, economic, financial and technical information

List and brief description of conditions
The documents listed in the following must be presented in full with the tender. Incomplete documents could lead to exclusion from the procedure.
Contract performance conditions
In the event that subcontractors are used, they must be named and their suitability is likewise to be substantiated on the basis of the listed documents. Furthermore, it must be confirmed that they will be available if the order is placed; their share in the scope of the contractual object must be stated.
List and brief description of selection criteria

(1) Designation of the company revenue for the last 3 business years;

(2) Self-declaration regarding the lack of exclusion criteria pursuant to § 123 and § 124 of the German Act Against Restraints of Competition (GWB);

(3) Excerpt from the Central Trade Register according to § 150a GewO (is requested by the client).

List and brief description of selection criteria

(1) Company profile and the actual amount of employees;

(2) Complete references (including contact persons with contact data) from comparable projects, which were realized in the last 3 years;

(3) Self-declaration that in case of system failure a technician will be on site at Fraunhofer IZM within 2 working days;

(4) Self-declaration that the technical support by phone or email should be available within 6 h during DE working hours (Mo-Fr from 08:00 to 17:00).



Procedure

Tender must be valid until
2018-12-07
The procurement is covered by the Government Procurement Agreement
Yes
Languages in which projects or requests to participate may be drawn up
EN
Local time
23:59
Type of procedure
YES
Date
2018-10-29

Complementary information

Service from which information about the review procedure may be obtained

Fraunhofer Gesellschaft zur Förderung der angewandten Forschung e.V. über Vergabeportal eVergabe

Hansastraße 27c

München

80686

einkauf@zv.fraunhofer.de

http://www.fraunhofer.de

Review body

Vergabekammer des Bundes beim Bundeskartellamt

Villemombler Straße 76

Bonn

53123

Precise information on deadline(s) for review procedures
A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a lack of willingness to help with the objection (§ 160 Par. 3 Clause 1 No. 4 GWB ). A request for review is additionally inadmissible if the contract has been awarded before the Vergabekammer has informed the ordering party of the request for review (§§ 168 Par. 2 Clause 1, 169 Par. 1 GWB). The award of the contract is possible 15 calendar days after the dispatch of the tenderer information pursuant to § 134 Par. 1 GWB. If the information is sent electronically or via fax, this time period is reduced to ten calendar days (§ 134 Par. 2 GWB). The time period begins on the day after the dispatch of the information by the ordering party; the day on which it is received at the concerned tenderer and applicant is not relevant. The admissibility of a request for review furthermore presupposes that a complaint has been made to the ordering party with regard to the asserted procurement violations within 10 days after knowledge was obtained of it(§ 160 Par. 3 Clause 1 No. 1 GWB). Complaints regarding violations of procurement rules that are apparent on the basis of the announcement must be made to the ordering party before the expiration of the time period named in the announcement for the application or for the tendering (§ 160 Par. 3 Clause 1 No. 1 GWB). Complaints regarding violations of procurement rules that do not become apparent until appearing in the award documents must be made to the ordering party no later than by the expiration of the time period for the application or for the tendering (§ 160 Par. 3 Clause 1 No. 1 GWB).
Body responsible for mediation procedures

Vergabekammer des Bundes beim Bundeskartellamt

Bonn

Date of dispatch of this notice
2018-09-28
This is a recurrent procurement
No Main CPV code 42990000

Bidding information

You can only currently bid on this tender directly, and not via Tender Search. For full bidding contact information, please upgrade your account.

Subscription plans

Bidding deadline

29 Oct 2018

0 days remaining

Total estimated value

Not specified

Locations

Germany, Munich

LOTS ASSOCIATED WITH THIS TENDER

Value

EUR Not specified

An automated assembly system on large area (610 x 610 mm2) is needed. System focus is the assembly of a wide variety of components (SMD, bare dies, ...) in high precision as one key process step of the Fan Out Panel Level Packaging process chain. The system should have high productivity, an assembly precision of < ± 4 μm (3 Sigma) at > 5000 u.p.h. is targeted. Components will be available on dicing frame, tape and reel, waffle or gel pack or JEDEC-tray – all of these must be handled for automated assembly.

Description of options

Option 1: Extended warranty period of 24 months; Option 2: Service/Maintenance Contract

Main site or place of performance

13355 Berlin

SIMILAR TENDERS

Norway : Oslo - Heating-system design services

Norway

Value: 7.0 million Norwegian Krone

United Kingdom : Newbury - Financial consultancy, financial transaction processing and clearing-house services

United Kingdom of Great Britain and Northern Ireland

Value: 2.5 million Pound Sterling

United Kingdom : Hardwick - Parenteral nutrition products

United Kingdom of Great Britain and Northern Ireland

Value: 4.0 million Pound Sterling

United Kingdom : Anglesey - Motor vehicles for the transport of 10 or more persons

United Kingdom of Great Britain and Northern Ireland

Value: 160,000 Pound Sterling

United Kingdom : Derby - Medical practice services

United Kingdom of Great Britain and Northern Ireland

Value: Not specified

Netherlands : Amsterdam - Coins

Netherlands

Value: Not specified

United Kingdom : Manchester - Adult and other education services

United Kingdom of Great Britain and Northern Ireland

Value: 20.0 million Pound Sterling